Vrijblijvende proefperiode van 90 dagen, 2 jaar garantie en gratis standaardlevering bij bestellingen boven de € 45

Using your System menu

Using the System menu, the following system settings can be adjusted as needed.


Note: Listening to an audio source while you make audio adjustments can be useful in fine-tuning your selections.

bass compensation: low-frequency reproduction, default is set to normal (0), can vary from -9 to +14

treble compensation: high-frequency reproduction, default is set to normal (0), can vary from -9 to +14


audio processing: "automatic" can be changed to "user adjustable," which allows additional options in the settings list

input levels: analog or digital input from tv, vcr, cbl·sat, or aux, default is set to normal (0), can vary from -6 to +6. allows you to set your device volume levels to be balanced with internal source volumes

adaptiq®: bose® technology that customizes sound to your room. requires supplied headset

expansion protocol: not for use unless it is indicated by a bose technician. only used with legacy bose products

cbl·sat/dvd audio: can be set for tv stereo instead of 5.1 reproduction

dvd audio priority: select the audio input priority for your dvd source

cbl-sat audio priority: select the audio input priority for your cbl·sat source


tv power: the media console can turn your tv on automatically whenever you select a video source

tv power status: the tv sensor can be detected if your tv is on or off. position it behind your tv until "not detected" changes to "tv on"

widescreen tv: tells the media console if you have a widescreen tv

tv video format: allows you to set the video format for a us or european tv

video black level: the intensity of black on screen can be darkened

video resolution: set the resolution of incoming video signals as adjustable or fixed

persistent video: determines if video from dvd, cbl·sat, vcr or aux remains on screen when you switch to an audio source

settings on tv: controls where the settings menu is displayed

Media Center

display brightness: adjusts the brightness level of the display panel

display language: can change from english to one of 8 other languages

coaxial source: assigns the coaxial digital connection to one source

tuner spacing: can change from one standard station spacing for am and fm to a different regional standard

restore settings: reverts all your settings back to the factory defaults

Remote Control

tv brand and code plus device, brand, and code for cbl· sat, vcr, and aux: the choices you make here allow the remote to control each device

tv control: determines which video source is displayed and controlled when tv is selected

remote version: describes your type of remote control. the functionality of these buttons can be changed

ir control: allows some ir remote controls to operate the system


Select "Setup" to access common setup options

Was deze informatie nuttig?

Bedankt voor de feedback. Je kunt hieronder nog extra opmerkingen toevoegen.
Jammer om te horen dat deze pagina niet aan je verwachtingen voldoet. Vertel ons over je ervaring en/of wat we beter zouden kunnen doen.
Tak, vi sætter pris på din feedback